thermometer test caps

Comark Calibration Thermometer Test Cap - (-18 Degree) Celsius -- 3 per case

Lumberg type connector for simulation of temperature of -18 degree C. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX22L - -5 degree C TX23L - 0 degree C TX24L - +3 degree C TX25L - +63 degree C TX26L - +70 degree C TX27L - +32 degree F Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector

Comark Calibration Thermometer Test Cap - (-5 Degree) Celsius -- 3 per case

Lumberg type connector for simulation of temperature of -5 degree C. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX21L - -18 degree C TX23L - 0 degree C TX24L - +3 degree C TX25L - +63 degree C TX26L - +70 degree TX27L - +32 degree F Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector

Comark Calibration Thermometer Test Cap - 0 Degree Celsius -- 3 per case

Lumberg type connector for simulation of temperature of 0 degree C. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX21L - -18 degree C TX22L - -5 degree C TX24L - +3 degree C TX25L - +63 degree C TX26L - +70 degree C TX27L - +32 degree F Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector

Comark Calibration Thermometer Test Cap - +3 Degree Celsius -- 3 per case

Lumberg type connector for simulation of temperature of +3 degree C. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX21L - -18 degree C TX22L - -5 degree C TX23L - 0 degree C TX25L - +63 degree C TX26L - +70 degree C TX27L - +32 degree F Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector

Comark Calibration Thermometer Test Cap - +63 Degree Celsius -- 3 per case

Lumberg type connector for simulation of temperature of -63 degree C. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX21L - -18 degree C TX22L - -5 degree C TX23L - 0 degree C TX24L - +3 degree C TX26L - +70 degree C TX27L - +32 degree F Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector.

Comark Calibration Thermometer Test Cap - +70 Degree Celsius -- 3 per case

Lumberg type connector for simulation of temperature of +70 degree C. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX21L -+70 degree C TX22L - -5 degree C TX23L - 0 degree C TX24L - +3 degree C TX25L - +63 degree C TX27L - +32 degree F Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector

The Comark Calibration Thermometer Test Cap of +32°F can be used for instrument calibration checks by comparing temperature readings on the thermometer to ensure it is within the correct range. It comes with a 6-pin Lumberg type connector, with each pin calibrated to replicate a specific temperature point. This test cap is ideal for commercial kitchens.

Lumberg type connector for simulation of temperature of +32 degree F. Six test caps are available, each calibrated to replicate a specific temperature point, relevant to the food industry, when attached to a thermometer. The temperature can be compared with the reading on the thermometer to check instrument calibration. Please see separate entries for other temperatures: TX21L - +70 degree C TX22L - -5 degree C TX23L - 0 degree C TX24L - +3 degree C TX25L - +63 degree C TX26L - +70 degree C Supplied with UKAS Certificate of Calibration Can be used with any Comark thermistor thermometer fitted with a Lumberg connector Comark Calibration Thermometer Test Cap - +32 Degree Fahrenheit -- 3 per case

thermometer test caps

Out of Stock

Comark Calibration Thermometer Test Cap - (-18 Degree) Celsius -- 3 per case

Out of Stock

Comark Calibration Thermometer Test Cap - (-5 Degree) Celsius -- 3 per case

Out of Stock

Comark Calibration Thermometer Test Cap - 0 Degree Celsius -- 3 per case

Out of Stock

Comark Calibration Thermometer Test Cap - +3 Degree Celsius -- 3 per case

Out of Stock

Comark Calibration Thermometer Test Cap - +63 Degree Celsius -- 3 per case

Out of Stock

Comark Calibration Thermometer Test Cap - +70 Degree Celsius -- 3 per case

Out of Stock

Comark Calibration Thermometer Test Cap - +32 Degree Fahrenheit -- 3 per case