in counter and counter top lid dispensers

LidSaver in-counter single lid dispenser NOTE: Lid manufacturer and lid model number required to place order Provides one-at-a-time lid dispensing, meeting Federal Mandate Number 4-904.11 Saves money by eliminating lid waste and inventory loss Sanitary dispensing - prevents contamination from excessive handling Dispenses hot or cold and high dome specialty drink lids Keeps operation clean and tidy Keeps traffic moving at busy self-service beverage stations Makes installation easy Makes lid size identification easy Saves labor time - loads in seconds and needs less attention - accepts over a full sleeve of lids

Vollrath In Counter Lid Dispenser

Offering durability, stability and convenience, the countertop dome lid holder by Vollrath is the easiest way to keep your dome lids organized and within reach. The break-resistant construction promises a long life; the simple design makes this holder easy to use, and the rubber feet prevent unwanted movement. Designed to accommodate approximately 80 standard-size dome lids, this reliable dome lid holder is an excellent choice for many establishments. Accommodates approximately 80 lids, which is one standard sleeve of dome lids Fits all standard-sized dome lids Break-resistant construction ensures long product life Rubber feet prevent movement and maintain stability Simple design is easy to use Made in the USA

Vollrath DLH-1 Countertop Dome Lid Holder, 11 1/6 inch

Lid Dispensing Cabinet, (3) SLR-LID-2, holds 8 Ounce to 44 Ounce lids, rim dia. 3 inch - 4-5/8 inch , black textured polystyrene cabinet, for use primarily with flat cold beverage lids (lids that nest tightly or have deep extrusions may not be compatible), 24-1/4 inch H x 8 inch W x 23 inch D, NSF cup dispensers DISPENSE-RITE LID2-S1 Series countertop lid dispensing cabinets are designed to combine simplicity with dependability for long-term reliability and maximum cost savings. Lid stacks are enclosed to protect from potential contamination due to spills, splashes and sneezes. The included SLR-LID-2 Series sanitary beverage lid dispenser requires no adjustment. These lid dispensers are designed to accommodate a variety of 8 Ounce to 44 Ounce lids (see disclaimer) with rim diameters ranging in size from 3 inch – 4 5/8 inch . All parts are easily removable for simple cleaning. All models are NSF Listed. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.

Dispense-Rite Countertop Black Polystyrene Lid Dispensing Cabinet with Three SLR-LID-2 Lid Dispensers

Lid Dispensing Cabinet, (2) SLR-LID-2, holds 8 Ounce to 44 Ounce lids, rim dia. 3 inch - 4-5/8 inch , black textured polystyrene cabinet, for use primarily with flat cold beverage lids (lids that nest tightly or have deep extrusions may not be compatible), 16-1/4 inch H x 8 inch W x 23 inch D, NSF cup dispensers DISPENSE-RITE LID2-S1 Series countertop lid dispensing cabinets are designed to combine simplicity with dependability for long-term reliability and maximum cost savings. Lid stacks are enclosed to protect from potential contamination due to spills, splashes and sneezes. The included SLR-LID-2 Series sanitary beverage lid dispenser requires no adjustment. These lid dispensers are designed to accommodate a variety of 8 Ounce to 44 Ounce lids (see disclaimer) with rim diameters ranging in size from 3 inch – 4 5/8 inch . All parts are easily removable for simple cleaning. All models are NSF Listed. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.

Product PDF 1

Dispense-Rite Countertop Black Polystyrene Lid Dispensing Cabinet with Two SLR-LID-2 Lid Dispensers

Lid Dispensing Cabinet, stackable, (1) SLR-LID-2S, holds 8 Ounce to 44 Ounce lids, rim dia. 3 inch - 4-5/8 inch , black textured polystyrene cabinet (stackable), 8-1/4 inch H x 8 inch W x 18-1/2 inch D, NSF Lid Dispenser LID-STK-1BT durable polystyrene units feature a modular stackable design that allows for custom dispensing configurations. The short cabinet depth makes these items ideal for areas with limited counter space. The LID-STK-1BT includes a SLR-LID-2S lid dispenser and accommodates a variety of 8 Ounce to 44 Ounce lids with rim diameters ranging from 3 inch –4 5/8 inch . A variety of STK Series stackable cabinets are available for use with cups, lids, straws and condiments. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.

Dispense-Rite Countertop Black Polystyrene Stackable Lid Dispensing Cabinet

Lid Dispenser, in-counter, holds 8 Ounce to 44 Ounce lids, rim dia. 3 inch - 4-5/8 inch , ring bezel 7-1/8 inch , cut-out 5-1/4 inch , 19 inch under-counter length, ABS plastic construction, for use primarily with flat cold beverage lids (lids that nest tightly or have deep extrusions may not be compatible), NSF DISPENSE-RITE SLR-LID-2 Series lid dispensers are designed to combine simplicity with dependability for long-term reliability and maximum cost savings. Lid stacks are enclosed to protect from potential contamination due to spills, splashes and sneezes. This sanitary beverage lid dispenser requires no adjustment and is available for a variety of in-counter and countertop applications. This unit is designed to accommodate a variety of 8 Ounce to 44 Ounce lids (see disclaimer) with rim diameters ranging in size from 3 inch – 4 5/8 inch . The SLR-LID-2 models require a 5 1/4 inch hole cut-out. Dispenser has a standard under-counter length of 22 inch . All parts are easily removable for simple cleaning. All models are NSF Listed. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.

Dispense-Rite In-Counter ABS Plastic Lid Dispenser, 19 inch Length

Lid Dispenser, in-counter, holds 8 Ounce to 44 Ounce lids, rim dia. 3 inch - 4-5/8 inch , ring bezel 7-1/8 inch , cut-out 5-1/4 inch , 22 inch under-counter length, ABS plastic construction, for use primarily with flat cold beverage lids (lids that nest tightly or have deep extrusions may not be compatible), NSF DISPENSE-RITE SLR-LID-2 Series lid dispensers are designed to combine simplicity with dependability for long-term reliability and maximum cost savings. Lid stacks are enclosed to protect from potential contamination due to spills, splashes and sneezes. This sanitary beverage lid dispenser requires no adjustment and is available for a variety of in-counter and countertop applications. This unit is designed to accommodate a variety of 8 Ounce to 44 Ounce lids (see disclaimer) with rim diameters ranging in size from 3 inch – 4 5/8 inch . The SLR-LID-2 models require a 5 1/4 inch hole cut-out. Dispenser has a standard under-counter length of 22 inch . All parts are easily removable for simple cleaning. All models are NSF Listed. Product Disclaimer: DISPENSE-RITE SLR-LID-2 Series Lid Dispensers are primarily intended for use with flat, cold beverage lids. Lids that are tightly nested or have deep extrusions may not be compatible. To confirm lid compatibility please contact a DISPENSE-RITE representative and provide a full sleeve of lids for testing prior to ordering.

Dispense-Rite In-Counter ABS Plastic Lid Dispenser, 22 inch Length

Dispense Rite Black Polystyrene Angled Dome Lid Dispenser, 11 3/4 x 5 1/2 x 14 1/2 inch -- 2 per case.

The ADL-3 and FDL-3 are designed for use with all dome lid sizes. The ADL-3 features an angled design for improved accessibility as well as surface mounted dispensing applications.

Dispense Rite DL Countertop Flat Dome Lid Dispenser, 9 x 5 1/2 x 4 1/2 inch -- 2 per case.

Dispense Rite DL Black Polystyrene In-Counter Dome Lid Dispenser, 26 x 7 x 8 inch -- 1 each.

DISPENSE-RITEs built-in lid dispensers help keep hot and cold drink serving areas organized by giving a uniform appearance to the storage of lids.

Dispense Rite DL Black Polystyrene In-Counter Dome Lid Dispenser, 26 x 7 x 8 inch.

Dispense Rite PL-CT 5 Section Lid Dispenser, 17 1/2 x 5 1/2 x 19 inch -- 1 each.

Lid Dispenser, countertop, 5 section, Small footprint occupies only 5-1/2" x 19" of countertop space. DISPENSE-RITEs countertop lid dispensers and organizers help keep hot and cold drink serving areas organized by giving a uniform appearance to the storage of lids.

in counter and counter top lid dispensers

Vollrath In Counter Lid Dispenser

Vollrath DLH-1 Countertop Dome Lid Holder, 11 1/6 inch

Out of Stock

Dispense-Rite Countertop Black Polystyrene Lid Dispensing Cabinet with Three SLR-LID-2 Lid Dispensers

Out of Stock

Dispense-Rite Countertop Black Polystyrene Lid Dispensing Cabinet with Two SLR-LID-2 Lid Dispensers

Out of Stock

Dispense-Rite Countertop Black Polystyrene Stackable Lid Dispensing Cabinet

Out of Stock

Dispense-Rite In-Counter ABS Plastic Lid Dispenser, 19 inch Length

Out of Stock

Dispense-Rite In-Counter ABS Plastic Lid Dispenser, 22 inch Length

Out of Stock

Dispense Rite Black Polystyrene Angled Dome Lid Dispenser, 11 3/4 x 5 1/2 x 14 1/2 inch -- 2 per case.

Out of Stock

Dispense Rite DL Countertop Flat Dome Lid Dispenser, 9 x 5 1/2 x 4 1/2 inch -- 2 per case.

Out of Stock

Dispense Rite DL Black Polystyrene In-Counter Dome Lid Dispenser, 26 x 7 x 8 inch.

Out of Stock

Dispense Rite PL-CT 5 Section Lid Dispenser, 17 1/2 x 5 1/2 x 19 inch.

price

in counter and counter top lid dispensers

price

Out of Stock

Out of Stock

Out of Stock

Out of Stock

Out of Stock

Out of Stock

Out of Stock

Out of Stock

Out of Stock